MK5 - How To Install A Euro Headlight Switch

  • Category: Electrical Electrical
  • Difficulty: Very Easy Easy
  • Original Author: DIYJus
  • Date Submitted: 2007.04.26
  • Date Updated:
  • Version: 1.0

Overview

  • Thanks to Cerksies from the 'tex for the use of his shiny new MK5 GTI. This DIY explains how to remove the original headlight switch and replace it with the European version. This will give more lighting options (headlights, fogs, parking lights, etc...) than are normally available in the US. The procedure below is very simple and should take around five minutes to complete.

Tools

Here's a list of recommended tools to complete this job:

No tools are required!

Parts

Euro headlight switch

Here is the part needed for this project:

1) European headlight switch. This can be obtained from eBay or your favorite VW parts store/site. There are a couple of versions of this available but they all use the same installation procedure.

Instructions

DISCLAIMER: No warranty or guarantee is provided for the information provided on this site; you use it at your own risk. Although contributors to DIYNexus have an impressive depth of knowledge, neither they, nor DIYNexus can be held liable for any technical inaccuracies, typographical errors or consequences from the use of this information. Depending on the project, it is possible to void your factory warranty, disable a safety feature, create a hazardous condition, be injured or killed. :-( If you are uncomfortable or inexperienced working with anything described on this site, please consider having the work done professionally.

  • Locate headlight switch1) Locate your headlight switch to the left of the steering column.
  • Switch removal2) To remove the switch you'll need to make sure it is pointing at the 'O' for off. Then, (1) push the switch inward and, while still holding it in, (2) turn it to the 'on' position. This should release the clips, which will allow you to pull the entire assembly straight out.
  • Plug removal3) Now that you have the switch out, you'll need to unplug it from the wiring harness. Simply push the small tab in on the plug and wiggle it free.
  • Reinstall switch4) To install your new switch, plug it in to the wiring harness, then align it with the hole in the dash and carefully press it in, as shown in this pic. The clips will lock into place automatically.
  • Finished5) You're all done! Enjoy your new lighting features.